Laser Cut Gainesville Hackerspace Keychains

From Gainesville Hackerspace Wiki
Revision as of 12:09, 3 November 2018 by Choffman (talk | contribs) (Created page with "Keychains are a great gift to give guests visiting the Hackerspace, and it is a great project to learn how to use the laser cutter. The GCode has already been created for a fe...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Keychains are a great gift to give guests visiting the Hackerspace, and it is a great project to learn how to use the laser cutter. The GCode has already been created for a few different sizes of acrylic, so if you want to skip straight to cutting you can start with #Premade Gcode Files.



Creating Toolpaths in CamBam

Premade Gcode Files

GCode files have already been created for the following sizes of acrylic:

196mm x 156mm, 0.08" thickness. 15 count

File locations:

  • /machinekit/Desktop/Hackerspace Keychains/Ruler_15count_196x156mm_0pt08in_Engrave.nc
  • /machinekit/Desktop/Hackerspace Keychains/Ruler_15count_196x156mm_0pt08in_Cut.nc


How to cut using the Laser Cutter

Retrieved from "https://wiki.gainesvillehackerspace.org/index.php?title=Laser_Cut_Gainesville_Hackerspace_Keychains&oldid=8931"