K40 Laser Cutter

From Gainesville Hackerspace Wiki
Revision as of 12:15, 3 November 2018 by Choffman (talk | contribs) (Created page with "This is a page for the K40 laser cutter. == Laser Specs == == Connecting to Laser Cutter == == Uploading gcode to the Laser Cutter == == Preoperation steps == == Postoper...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This is a page for the K40 laser cutter.

Laser Specs

Connecting to Laser Cutter

Uploading gcode to the Laser Cutter

Preoperation steps

Postoperation steps